How to operate the canned beverage production line normally?

How to operate the canned beverage production line normally? These problems have become more important common sense in the use of canned beverage production lines. Through this article, we will understand the causes and troubleshooting methods of the canned beverage production lines.

Trouble phenomenon: After booting, there is no display on the LCD screen of the display controller. The cause of the failure: Whether the power socket has electricity; whether the power plug is off; the fuse is loose or blown. Troubleshooting: Reinsert the plug; reinstall or replace the fuse; note that the fuse must be selected according to the requirements on the specification. Remarks: Be sure to check and determine what caused the fuse to blow.

Trouble phenomenon: After starting up, the display screen shows correct, and the indication is running, but the pump wheel does not rotate. The cause of the failure: the roller inside the pump head is stuck; the no-bottle stop-filling line is not connected or the level is wrong; the drive circuit board is broken. Troubleshooting: Install the pump head as required; connect the non-bottle stop-filling line and make the level correct; check the circuit board. Remarks: It is best to repair the circuit board by the supplier or company.

Trouble phenomenon: The pump wheel rotates, but the liquid cannot be delivered. The cause of the failure: the hose is not pressed in place; the hose is broken and leaking. Troubleshooting: adjust the adjusting screw on the upper cover of the pump head; replace with a new hose.
Trouble phenomenon: The hose slides to one side along with the roller when working. The cause of the failure: the hose is not fixed properly. Troubleshooting: Connect the hose with a tee and hang it on the fixing screw or use a pipe clamp to fix it.