Filling machine problem

Filling machine problem

The production of beer, beverages, soy sauce and vinegar is inseparable from liquid filling machines, which are closely related to our daily life. Commodity manufacturers are inseparable from liquid filling machines in the production of liquid commodities. In use, machine failures are also common. Then, what problems should be paid attention to in the use of the liquid filling machine, what problems will occur, and how to solve them.

Can the liquid filling machine fill the viscous body? In general, it is possible, but it still depends on the consistency. For example, oil and oil should not be a problem, and it can be used to increase the feeding pipe and valve. If it is too thick and has poor fluidity, it cannot be filled without pressure and no flow. The liquid filling machine cannot play a filtering role. If necessary, contact the manufacturer, and a filter device such as a reverse osmosis membrane can be added inside.

During the filling process of the liquid filling machine, the leakage protector will trip when the second channel starts to fill. Sometimes it trips during the filling process. What should I do? There may be a leakage, check and use when the second channel starts to fill. the electrical actuators to see if there is any leakage. If so, replacing the leakage protector can solve the tripping problem, or it may be that the solenoid valve has entered the water, and the liquid material has leaked into the solenoid valve, which needs to be cleaned up.

For the daily maintenance of the liquid filling machine, the machine should be oiled frequently to keep the machine running smoothly. When not in use, it is necessary to observe and operate the components frequently to prevent failures.

When using, pay attention to the reasonable and standardized operation and use of the machine, and try to avoid damage caused by irregular operations. Only in good machine condition can the liquid filling machine create the greatest value for the enterprise.