Precautions for maintenance of automatic filling machine equipment

Precautions for maintenance of automatic filling machine equipment

After the filling machine manufacturer installs the equipment, first power on, turn on the power switch, the power indicator light is on, and the touch screen is powered and starts to work. When the touch screen enters the operation interface, turn the manual/automatic switch to the manual state, and jog the solenoid valve 1#-12#, front door valve, rear door valve, bottle clamping valve, leakage valve, liquid replenishment valve, rising valve, and falling valve in turn. , manual injection, manual return to zero. When each action is completed in the manual state. Turn the manual/automatic switch to the automatic state, and use 12 empty filling bottles to pass through the conveyor with a photoelectric sensor to count, and then the front door is closed. After the bottle clamping valve is activated, the filling head drops to the designated position after a delay, and the servo motor drives the injection liquid. When the cylinder body rises and injects for a specified time, and the filling head rises to the highest position of the cylinder after the specified filling capacity, the servo motor drops to the lowest point of the limit switch. The bottle clamp is released, the back door is opened and the back door photoelectric counts the number of filled bottles to the specified number, and the front door starts to enter the bottle.