The Key Factors that Influence the Life of the Labeling Machine

The longer the service life of the equipment, the lower the failure rate, and the higher the cost of investment recovery. Then what are the relevant factors that affect the service life of the Labeling Machine ?

1. Equipment quality

The labeling machine is made of self-adhesive paper, and there is no residual glue in the labeling process, and it is clean and hygienic, which is also the main reason why many enterprises choose this labeling machine. But a good piece of equipment is made from many parts. The quality and process performance of each component determines the overall service life of the labeling machine. Any component problem should be timely adjusted or replaced, so as not to affect the overall operation of the labeling machine.

2. Daily maintenance and maintenance

The installation environment should be paid attention to, and the labeling machine should be well prepared to prevent moisture and exposure to the sun, to ensure that the temperature of the processing environment is suitable, to avoid danger in the operation of the labeling machine. The method of daily repair and maintenance of the equipment is very simple, which does not need careful daily management. Regular inspection of the oil is good, of course, to combine with the equipment's use and decided. Besides, in the process of labeling machine use, as far as possible to remove the relevant obstacles, avoid parts block and burn out the motor. If the labeling machine is not used for a long time, the dust on the surface of the equipment should be cleaned and the power must be disconnected.

Normally, the general service life of the labeling machine is about 7 years. If properly maintained, it can be used for at least 10 years. Of course, this does not prevent the r&d technology and level of the equipment from constantly improving during this period. If you want to increase the service life of the labeling machine, you have to consider the appropriate maintenance program.